Selection help
Is this resin right for your workflow?
- Check the intended application and final part requirements.
- Confirm printer compatibility, cleaning and curing workflow.
- Compare color, detail, mechanical needs and batch consistency.
Resine-3D
FunToDo F1+ Resin - 4 Colors
FunToDo F1+ Resin - 4 Colors
Couldn't load pickup availability
FunToDo F1+ 3D Resin (4 colors) - TPO Free - Made in France
Photopolymer FunToDo F1+ is designed specifically for owners of SLA 3D printers. Resin is tested on Formlabs Form 1, 1+ and Form 2 printers and is compatible with PreForm software.
Thanks to the high resolution of the polymer, especially black, amazing printing accuracy is achieved with layer thicknesses from 0.02 mm. To obtain the desired shade of color, pigment can be added to the transparent or white F1+ polymer. Buy a branded set of pigments and mix in any proportion.
To print with Formlabs Form 2 and Form 3 printers, use a universal refillable cartridge. The Form 2 printer allows you to print with third-party polymers in Open Mode, however, automatic mixing of the material does not work.
Technical specification
- Packaging: 1 kg
- Color: Transparent, White, Gray, or Black
- Aroma: No distinct odor
- Brookfield viscosity: 95 mPa*s at 25°C
- Temperature resistance: -35°C to +180°C
- Hardness Shore D: 80
- Density: 1.12 g/cm³
- Shrinkage: <0.5%
- Z-axis resolution (layer height): 20 to 200 µm
- Illumination spectrum: from 225 to 415 nm
- Storage conditions: 10°C< t >40°C, in a dark and dry place
- Wash: 40-60% ethanol, isopropanol or TEK1960
Share
- Description
- Technical specification
FunToDo F1+ 3D Resin (4 colors) - TPO Free - Made in France
Photopolymer FunToDo F1+ is designed specifically for owners of SLA 3D printers. Resin is tested on Formlabs Form 1, 1+ and Form 2 printers and is compatible with PreForm software.
Thanks to the high resolution of the polymer, especially black, amazing printing accuracy is achieved with layer thicknesses from 0.02 mm. To obtain the desired shade of color, pigment can be added to the transparent or white F1+ polymer. Buy a branded set of pigments and mix in any proportion.
To print with Formlabs Form 2 and Form 3 printers, use a universal refillable cartridge. The Form 2 printer allows you to print with third-party polymers in Open Mode, however, automatic mixing of the material does not work.
- Packaging: 1 kg
- Color: Transparent, White, Gray, or Black
- Aroma: No distinct odor
- Brookfield viscosity: 95 mPa*s at 25°C
- Temperature resistance: -35°C to +180°C
- Hardness Shore D: 80
- Density: 1.12 g/cm³
- Shrinkage: <0.5%
- Z-axis resolution (layer height): 20 to 200 µm
- Illumination spectrum: from 225 to 415 nm
- Storage conditions: 10°C< t >40°C, in a dark and dry place
- Wash: 40-60% ethanol, isopropanol or TEK1960