Selection help
Is this resin right for your workflow?
- Check the intended application and final part requirements.
- Confirm printer compatibility, cleaning and curing workflow.
- Compare color, detail, mechanical needs and batch consistency.
Resine-3D
DermaForm Rigid
DermaForm Rigid
Excluding VAT. Taxes calculated at checkout.
Couldn't load pickup availability
DermaForm · Professional audiology materials
Rigid resin for precision audio-device manufacturing.
DermaForm Rigid is a single-component, light-curing resin developed for precision manufacturing of audio devices. It gives professional laboratories and manufacturers a rigid material with a clean surface finish and documented mechanical properties.
Available in Skin and Blue · 1 kg bottles
385 nm or 405 nm systems, with printer-specific settings.
Manufacturer-reported hardness of post-cured material.
Flexural modulus, measured to DIN EN ISO 178.
Built around professional audiology
For laboratories, audio-device manufacturers and specialist printing services developing precision parts. Select the material against your device design, mechanical requirements and intended conditions of use.
Two colours. One technical reference.
Choose Skin or Blue using the colour selector above. Both are supplied in 1 kg bottles; this page centralises the material data, handling guidance and documentation.
Assess the fully cured material, printing and finishing process, contact conditions and intended use together. The finished-device manufacturer is responsible for validating the process and final device and meeting the applicable requirements.
From material selection to production
- Confirm the printing system. Check the technology, wavelength and exposure settings for your printer.
- Define the finishing workflow. Establish cleaning, complete drying and application-specific post-curing conditions.
- Validate the finished part. Confirm its properties and suitability for the intended application before production.
Before you begin
Is my printer compatible?
The TDS specifies DLP/LCD systems at 385 nm or 405 nm. Wavelength alone does not establish compatibility; validate the printer settings and complete processing workflow.
Can uncured resin contact the skin?
Avoid contact with liquid or incompletely cured resin. Follow the Safety Data Sheet and use appropriate protective equipment.
Does the material certify the finished device?
The finished-device manufacturer must validate the manufacturing process, device and intended use. Material documentation does not automatically certify a printed device.
Discuss your application with Resine-3D
Tell us about your printer, intended device and finishing equipment to identify the technical information needed for your project.
Ask for technical guidanceTechnical specification
Manufacturer-reported values from TDS version 1.2. Mechanical properties refer to post-cured material; results depend on processing and post-curing conditions.
| Property | Reported value / condition |
|---|---|
| Pack / colours | 1 kg · Skin / Blue |
| Printing systems | DLP / LCD · 385 nm or 405 nm |
| Printing temperature | 20–25 °C |
| Viscosity | Approximately 700 mPa·s; measurement temperature not specified |
| Hardness | Shore D 88 |
| Flexural strength | 85 MPa · DIN EN ISO 178 |
| Flexural modulus | 2,100 MPa · DIN EN ISO 178 |
| Tensile strength | 55 MPa · DIN EN ISO 527-1 |
| Elongation | 10% · DIN EN ISO 527-1 |
Printing and post-processing
- Shake the bottle for approximately 2–3 minutes and allow bubbles to dissipate.
- Confirm printer exposure settings and the complete workflow for your intended application.
- The TDS specifies IPA above 97% or an approved resin cleaner. Do not soak in solvent for more than 5 minutes.
- Dry parts completely before UV chamber post-curing.
Obtain the application-specific validated protocol for skin-contact devices. These handling notes do not provide a complete validation or curing cycle.
Safety and storage
For trained professional users. Liquid resin can irritate skin, eyes and the respiratory system and may cause an allergic skin reaction. Follow the SDS, use appropriate protective equipment and provide adequate ventilation.
Store above 4 °C and below 27 °C, sealed in the original container, away from direct sunlight and heat. Follow the SDS and local disposal requirements; do not discharge into drains.
Technical Documents
Download the product and material documentation below. Review the technical and safety instructions before handling or processing the resin.
Technical Data Sheet
Version 1.2 · 2 September 2026 · PDF
Material properties and general printing, cleaning and post-processing guidance.
Download TDS (PDF)Safety Data Sheet
Revision 1 · 1 September 2026 · PDF
Liquid resin hazards, protective measures, handling, storage and disposal.
Download SDS (PDF)Product brochure
DermaForm Rigid · PDF
Manufacturer’s product overview, applications and available colours.
Download brochure (PDF)EU Declaration of Conformity
Version V1 · 2 October 2026 · PDF
Manufacturer’s declaration for the product named “DermaForm Resin”, listing Blue, Skin, Black and Rose.
Download EU declaration (PDF)The declaration’s product name is DermaForm Resin. Confirm its applicability to DermaForm Rigid and your manufacturing process with Resine-3D. The finished-device manufacturer remains responsible for validating the final device and intended use.
Need application-specific processing information?
Contact Resine-3D to discuss the protocol and technical information required for your device.
Ask for technical guidanceShare
- Description
- Technical specification
- Technical Documents
DermaForm · Professional audiology materials
Rigid resin for precision audio-device manufacturing.
DermaForm Rigid is a single-component, light-curing resin developed for precision manufacturing of audio devices. It gives professional laboratories and manufacturers a rigid material with a clean surface finish and documented mechanical properties.
Available in Skin and Blue · 1 kg bottles
DLP / LCD385 nm or 405 nm systems, with printer-specific settings.
Shore D 88Manufacturer-reported hardness of post-cured material.
2,100 MPaFlexural modulus, measured to DIN EN ISO 178.
Built around professional audiology
For laboratories, audio-device manufacturers and specialist printing services developing precision parts. Select the material against your device design, mechanical requirements and intended conditions of use.
Two colours. One technical reference.
Choose Skin or Blue using the colour selector above. Both are supplied in 1 kg bottles; this page centralises the material data, handling guidance and documentation.
Skin-contact applications require a validated process.Assess the fully cured material, printing and finishing process, contact conditions and intended use together. The finished-device manufacturer is responsible for validating the process and final device and meeting the applicable requirements.
From material selection to production
- Confirm the printing system. Check the technology, wavelength and exposure settings for your printer.
- Define the finishing workflow. Establish cleaning, complete drying and application-specific post-curing conditions.
- Validate the finished part. Confirm its properties and suitability for the intended application before production.
Before you begin
Is my printer compatible?
The TDS specifies DLP/LCD systems at 385 nm or 405 nm. Wavelength alone does not establish compatibility; validate the printer settings and complete processing workflow.
Can uncured resin contact the skin?
Avoid contact with liquid or incompletely cured resin. Follow the Safety Data Sheet and use appropriate protective equipment.
Does the material certify the finished device?
The finished-device manufacturer must validate the manufacturing process, device and intended use. Material documentation does not automatically certify a printed device.
Discuss your application with Resine-3D
Tell us about your printer, intended device and finishing equipment to identify the technical information needed for your project.
Ask for technical guidanceManufacturer-reported values from TDS version 1.2. Mechanical properties refer to post-cured material; results depend on processing and post-curing conditions.
| Property | Reported value / condition |
|---|---|
| Pack / colours | 1 kg · Skin / Blue |
| Printing systems | DLP / LCD · 385 nm or 405 nm |
| Printing temperature | 20–25 °C |
| Viscosity | Approximately 700 mPa·s; measurement temperature not specified |
| Hardness | Shore D 88 |
| Flexural strength | 85 MPa · DIN EN ISO 178 |
| Flexural modulus | 2,100 MPa · DIN EN ISO 178 |
| Tensile strength | 55 MPa · DIN EN ISO 527-1 |
| Elongation | 10% · DIN EN ISO 527-1 |
Printing and post-processing
- Shake the bottle for approximately 2–3 minutes and allow bubbles to dissipate.
- Confirm printer exposure settings and the complete workflow for your intended application.
- The TDS specifies IPA above 97% or an approved resin cleaner. Do not soak in solvent for more than 5 minutes.
- Dry parts completely before UV chamber post-curing.
Obtain the application-specific validated protocol for skin-contact devices. These handling notes do not provide a complete validation or curing cycle.
Safety and storage
For trained professional users. Liquid resin can irritate skin, eyes and the respiratory system and may cause an allergic skin reaction. Follow the SDS, use appropriate protective equipment and provide adequate ventilation.
Store above 4 °C and below 27 °C, sealed in the original container, away from direct sunlight and heat. Follow the SDS and local disposal requirements; do not discharge into drains.
Download the product and material documentation below. Review the technical and safety instructions before handling or processing the resin.
Technical Data Sheet
Version 1.2 · 2 September 2026 · PDF
Material properties and general printing, cleaning and post-processing guidance.
Download TDS (PDF)Safety Data Sheet
Revision 1 · 1 September 2026 · PDF
Liquid resin hazards, protective measures, handling, storage and disposal.
Download SDS (PDF)Product brochure
DermaForm Rigid · PDF
Manufacturer’s product overview, applications and available colours.
Download brochure (PDF)EU Declaration of Conformity
Version V1 · 2 October 2026 · PDF
Manufacturer’s declaration for the product named “DermaForm Resin”, listing Blue, Skin, Black and Rose.
Download EU declaration (PDF) Confirm the documentation for your intended application.The declaration’s product name is DermaForm Resin. Confirm its applicability to DermaForm Rigid and your manufacturing process with Resine-3D. The finished-device manufacturer remains responsible for validating the final device and intended use.
Need application-specific processing information?
Contact Resine-3D to discuss the protocol and technical information required for your device.
Ask for technical guidance