Download ready-to-print Chitubox profiles for the Phrozen Sonic MEGA 8K Mono LCD ParaLED MSLA 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.
SKU |
RESIN NAME |
0.05 MM LAYER |
0.1 MM LAYER |
SPEED |
DELAY |
NNBR |
Standard Blend Resin, Red |
5.1s, bottom 50s |
6.9s, bottom 70s |
100 mm/min |
1s |
NNBB |
Standard Blend Resin, Black |
5.3s, bottom 50s |
7.2s, bottom 70s |
100 mm/min |
1s |
NNBU |
Standard Blend Resin, Unp. |
4.7s, bottom 50s |
6.3s, bottom 60s |
100 mm/min |
1s |
NIBR |
Industrial Blend Resin, Red |
5.1s, bottom 50s |
6.9s, bottom 70s |
100 mm/min |
1s |
NIBB |
Industrial Blend Resin, Black |
5.3s, bottom 50s |
7.2s, bottom 70s |
100 mm/min |
1s |
NIBU |
Industrial Blend Resin, Unp. |
4.7s, bottom 50s |
6.3s, bottom 60s |
100 mm/min |
1s |
CB |
Castable Blend Resin, Red |
5.1s, bottom 50s |
6.9s, bottom 70s |
100 mm/min |
1s |
NSW |
Snow White Resin, White |
5.1s, bottom 50s |
6.9s, bottom 70s |
100 mm/min |
1s |
DB |
Deep Black Resin, Black |
5.6s, bottom 60s |
7.5s, bottom 70s |
100 mm/min |
1s |
AG |
Ash Grey Resin, Grey |
5.1s, bottom 50s |
6.9s, bottom 70s |
100 mm/min |
1s |
NC |
Nano Clear Resin, Clear |
6.2s, bottom 60s |
8.4s, bottom 80s |
100 mm/min |
1s |
DCH |
Dentifix-3D Casting HR Resin, Green |
5.3s, bottom 50s |
7.2s, bottom 70s |
100 mm/min |
1s |
DM+ |
Dentifix-3D Modelling HR+ Resin, Grey |
5.8s, bottom 60s |
7.8s, bottom 80s |
100 mm/min |
1s |
DMHS |
Dentifix-3D Modelling HR Resin, Sand |
6s, bottom 60s |
8.1s, bottom 80s |
100 mm/min |
1s |
DMHG |
Dentifix-3D Modelling HR Resin, Grey |
6s, bottom 60s |
8.1s, bottom 80s |
100 mm/min |
1s |
DMHC |
Dentifix-3D Modelling HR Resin, Clear |
6.5s, bottom 60s |
8.7s, bottom 90s |
100 mm/min |
1s |
DGP |
Dentifix-3D Gingiva Mask FLEX, Pink |
7.8s, bottom 80s |
10.5s, bottom 100s |
50 mm/min |
2s |