Download ready-to-print Chitubox profiles for the Uniz zSLTV-23 Mono LCD 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.
SKU |
RESIN NAME |
0.05 MM LAYER |
0.1 MM LAYER |
SPEED |
DELAY |
|
NNBR |
Standard Blend Resin, Red |
5s, bottom 50s |
6.8s, bottom 70s |
100 mm/min |
1s |
|
NNBB |
Standard Blend Resin, Black |
5.2s, bottom 50s |
7.1s, bottom 70s |
100 mm/min |
1s |
|
NNBU |
Standard Blend Resin, Unp. |
4.6s, bottom 50s |
6.2s, bottom 60s |
100 mm/min |
1s |
|
NIBR |
Industrial Blend Resin, Red |
5s, bottom 50s |
6.8s, bottom 70s |
100 mm/min |
1s |
|
NIBB |
Industrial Blend Resin, Black |
5.2s, bottom 50s |
7.1s, bottom 70s |
100 mm/min |
1s |
|
NIBU |
Industrial Blend Resin, Unp. |
4.6s, bottom 50s |
6.2s, bottom 60s |
100 mm/min |
1s |
|
CB |
Castable Blend Resin, Red |
5s, bottom 50s |
6.8s, bottom 70s |
100 mm/min |
1s |
|
NSW |
Snow White Resin, White |
5s, bottom 50s |
6.8s, bottom 70s |
100 mm/min |
1s |
|
DB |
Deep Black Resin, Black |
5.5s, bottom 50s |
7.4s, bottom 70s |
100 mm/min |
1s |
|
AG |
Ash Grey Resin, Grey |
5s, bottom 50s |
6.8s, bottom 70s |
100 mm/min |
1s |
|
NC |
Nano Clear Resin, Clear |
6.1s, bottom 60s |
8.2s, bottom 80s |
100 mm/min |
1s |
|
DCH |
Dentifix-3D Casting HR Resin, Green |
5.2s, bottom 50s |
7.1s, bottom 70s |
100 mm/min |
1s |
|
DM+ |
Dentifix-3D Modelling HR+ Resin, Grey |
5.7s, bottom 60s |
7.7s, bottom 80s |
100 mm/min |
1s |
|
DMHS |
Dentifix-3D Modelling HR Resin, Sand |
5.9s, bottom 60s |
7.9s, bottom 80s |
100 mm/min |
1s |
|
DMHG |
Dentifix-3D Modelling HR Resin, Grey |
5.9s, bottom 60s |
7.9s, bottom 80s |
100 mm/min |
1s |
|
DMHC |
Dentifix-3D Modelling HR Resin, Clear |
6.3s, bottom 60s |
8.5s, bottom 80s |
100 mm/min |
1s |
|
DGP |
Dentifix-3D Gingiva Mask FLEX, Pink |
7.6s, bottom 80s |
10.3s, bottom 100s |
50 mm/min |
2s |