Printing parameters for Tronxy Ultrabot

Download ready-to-print Chitubox profiles for the Tronxy Ultrabot LCD 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.

 

SKU
RESIN NAME
0.05 MM LAYER
0.1 MM LAYER
SPEED
DELAY

NNBR

Standard Blend Resin, Red

17.4s, bottom 170s

23.5s, bottom 230s

100 mm/min

1s

NNBB

Standard Blend Resin, Black

18.1s, bottom 180s

24.5s, bottom 240s

100 mm/min

1s

NNBU

Standard Blend Resin, Unp.

15.9s, bottom 160s

21.4s, bottom 210s

100 mm/min

1s

NIBR

Industrial Blend Resin, Red

17.4s, bottom 170s

23.5s, bottom 230s

100 mm/min

1s

NIBB

Industrial Blend Resin, Black

18.1s, bottom 180s

24.5s, bottom 240s

100 mm/min

1s

NIBU

Industrial Blend Resin, Unp.

15.9s, bottom 160s

21.4s, bottom 210s

100 mm/min

1s

CB

Castable Blend Resin, Red

17.4s, bottom 170s

23.5s, bottom 230s

100 mm/min

1s

NSW

Snow White Resin, White

17.4s, bottom 170s

23.5s, bottom 230s

100 mm/min

1s

DB

Deep Black Resin, Black

18.9s, bottom 190s

25.5s, bottom 250s

100 mm/min

1s

AG

Ash Grey Resin, Grey

17.4s, bottom 170s

23.5s, bottom 230s

100 mm/min

1s

NC

Nano Clear Resin, Clear

21.2s, bottom 210s

28.6s, bottom 290s

100 mm/min

1s

DCH

Dentifix-3D Casting HR Resin, Green

18.1s, bottom 180s

24.5s, bottom 240s

100 mm/min

1s

DM+

Dentifix-3D Modelling HR+ Resin, Grey

19.7s, bottom 200s

26.5s, bottom 260s

100 mm/min

1s

DMHS

Dentifix-3D Modelling HR Resin, Sand

20.4s, bottom 200s

27.5s, bottom 270s

100 mm/min

1s

DMHG

Dentifix-3D Modelling HR Resin, Grey

20.4s, bottom 200s

27.5s, bottom 270s

100 mm/min

1s

DMHC

Dentifix-3D Modelling HR Resin, Clear

21.9s, bottom 220s

29.6s, bottom 300s

100 mm/min

1s

DGP

Dentifix-3D Gingiva Mask FLEX, Pink

26.4s, bottom 260s

35.7s, bottom 360s

50 mm/min

2s

Back to blog