Printing parameters for Phrozen Shuffle XL 2018

Download ready-to-print Chitubox profiles for the Phrozen Shuffle XL 2018 LCD ParaLED MSLA 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.

 

SKU
RESIN NAME
0.05 MM LAYER
0.1 MM LAYER
SPEED
DELAY

NNBR

Standard Blend Resin, Red

10.5s, bottom 100s

14.2s, bottom 140s

100 mm/min

1s

NNBB

Standard Blend Resin, Black

10.9s, bottom 110s

14.8s, bottom 150s

100 mm/min

1s

NNBU

Standard Blend Resin, Unp.

9.6s, bottom 100s

12.9s, bottom 130s

100 mm/min

1s

NIBR

Industrial Blend Resin, Red

10.5s, bottom 100s

14.2s, bottom 140s

100 mm/min

1s

NIBB

Industrial Blend Resin, Black

10.9s, bottom 110s

14.8s, bottom 150s

100 mm/min

1s

NIBU

Industrial Blend Resin, Unp.

9.6s, bottom 100s

12.9s, bottom 130s

100 mm/min

1s

CB

Castable Blend Resin, Red

10.5s, bottom 100s

14.2s, bottom 140s

100 mm/min

1s

NSW

Snow White Resin, White

10.5s, bottom 100s

14.2s, bottom 140s

100 mm/min

1s

DB

Deep Black Resin, Black

11.4s, bottom 110s

15.4s, bottom 150s

100 mm/min

1s

AG

Ash Grey Resin, Grey

10.5s, bottom 100s

14.2s, bottom 140s

100 mm/min

1s

NC

Nano Clear Resin, Clear

12.8s, bottom 130s

17.2s, bottom 170s

100 mm/min

1s

DCH

Dentifix-3D Casting HR Resin, Green

10.9s, bottom 110s

14.8s, bottom 150s

100 mm/min

1s

DM+

Dentifix-3D Modelling HR+ Resin, Grey

11.9s, bottom 120s

16s, bottom 160s

100 mm/min

1s

DMHS

Dentifix-3D Modelling HR Resin, Sand

12.3s, bottom 120s

16.6s, bottom 170s

100 mm/min

1s

DMHG

Dentifix-3D Modelling HR Resin, Grey

12.3s, bottom 120s

16.6s, bottom 170s

100 mm/min

1s

DMHC

Dentifix-3D Modelling HR Resin, Clear

13.2s, bottom 130s

17.8s, bottom 180s

100 mm/min

1s

DGP

Dentifix-3D Gingiva Mask FLEX, Pink

15.9s, bottom 160s

21.5s, bottom 210s

50 mm/min

2s



Retour au blog