Printing parameters for Peopoly Phenom

Download ready-to-print Chitubox profiles for the Peopoly Phenom MSLA LCD 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.

 

SKU
RESIN NAME
0.05 MM LAYER
0.1 MM LAYER
SPEED
DELAY

NNBR

Standard Blend Resin, Red

23.6s, bottom 240s

31.9s, bottom 320s

100 mm/min

1s

NNBB

Standard Blend Resin, Black

24.6s, bottom 250s

33.3s, bottom 330s

100 mm/min

1s

NNBU

Standard Blend Resin, Unp.

21.6s, bottom 220s

29.1s, bottom 290s

100 mm/min

1s

NIBR

Industrial Blend Resin, Red

23.6s, bottom 240s

31.9s, bottom 320s

100 mm/min

1s

NIBB

Industrial Blend Resin, Black

24.6s, bottom 250s

33.3s, bottom 330s

100 mm/min

1s

NIBU

Industrial Blend Resin, Unp.

21.6s, bottom 220s

29.1s, bottom 290s

100 mm/min

1s

CB

Castable Blend Resin, Red

23.6s, bottom 240s

31.9s, bottom 320s

100 mm/min

1s

NSW

Snow White Resin, White

23.6s, bottom 240s

31.9s, bottom 320s

100 mm/min

1s

DB

Deep Black Resin, Black

25.7s, bottom 260s

34.6s, bottom 350s

100 mm/min

1s

AG

Ash Grey Resin, Grey

23.6s, bottom 240s

31.9s, bottom 320s

100 mm/min

1s

NC

Nano Clear Resin, Clear

28.7s, bottom 290s

38.8s, bottom 390s

100 mm/min

1s

DCH

Dentifix-3D Casting HR Resin, Green

24.6s, bottom 250s

33.3s, bottom 330s

100 mm/min

1s

DM+

Dentifix-3D Modelling HR+ Resin, Grey

26.7s, bottom 270s

36s, bottom 360s

100 mm/min

1s

DMHS

Dentifix-3D Modelling HR Resin, Sand

27.7s, bottom 280s

37.4s, bottom 370s

100 mm/min

1s

DMHG

Dentifix-3D Modelling HR Resin, Grey

27.7s, bottom 280s

37.4s, bottom 370s

100 mm/min

1s

DMHC

Dentifix-3D Modelling HR Resin, Clear

29.8s, bottom 300s

40.2s, bottom 400s

100 mm/min

1s

DGP

Dentifix-3D Gingiva Mask FLEX, Pink

35.9s, bottom 360s

48.5s, bottom 480s

50 mm/min

2s

Retour au blog